Care and maintenance
Page EN-21
Cleaning
1. Wipe the interior with warm rinsing water.
When wiping clean, add a few drops of
vinegar to the water to prevent mould
from forming.
2. Only clean the door seal with clean water;
it is sensitive to oil and fat.
3. Rub everything completely dry, including
the lid seal, and allow to air briefly.
4. Screw the stoppers (17) and (16) for the
condensate drain (5) back in.
5. Re-insert the drawers (6) and put the food
back into the inside of the appliance.
6. Re-insert the mains plug in the socket and
either activate the “Super” mode, as de-
scribed in the section ““Super” mode” on
page EN-11, or put the temperature setting
to +2 °C, as described in the section “Set-
ting the temperature” on page EN-11.
7. As soon as the lowest refrigeration tem-
perature (+2 °C) or the lowest freezing
temperature (–30 °C) is reached, put the
temperature settings back to the usual
values.
Interior light
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■
Do not remove the cover from the in-
terior light.
■
Do not replace the interior light.
Maintenance-free LEDs are used to light the
appliance. The LEDs are not replaceable.
If the interior light does not work, please con-
tact our service department (see page EN-29).
