Set-up and start-up
Page EN-36
Unpacking the appliance
WARNING
Microwave hazard!
The cover in the cooking chamber
serves to protect the magnetron, which
emits the microwaves.
■
Never remove the cover inside the
cooking chamber!
• Completely remove all protective films
from the housing, the inside of the door
and the cooking chamber.
Choosing the correct set-up
location
WARNING
Fire hazard!
Improper handling of the appliance
may result in damage or may cause a
fi re. Heat trapped inside the appliance
may shorten its service life.
■
Ensure suffi cient ventilation. Do not
cover the vents, for example with
oven mitts or cookery books.
■
When setting up the appliance, en-
sure that the minimum
safety dis-
tances
are maintained which are
specifi ed in the user manual.
■
Do not put the appliance in a cup-
board.
The set-up location must fulfil the following
conditions:
Safety distances:
Set-up height, measured
from the ground, at least
85 cm
above
30 cm
behind
0 cm
to the left
20 cm
to the right
20 cm
The appliance should not be placed directly
beside a refrigerator or freezer. Heat output
increases their energy consumption unnec-
essarily.
There must be a
minimum spacing of 2 m
from
radio devices and televisions
, etc., to
ensure that the reception is not distorted.
• Set the appliance up with its back against
a wall.
Cleaning before first use
The appliance should be cleaned before first
use so that, e.g., packaging residue will not
negatively affect the taste of the food.
(22)
(5)
1. Open the appliance door (5) by the han-
dle (22).
2. Completely empty the cooking cham-
ber (1).
3. Wipe the appliance interior and exterior
with a soft, damp cloth.
4. Leave the appliance door (5) open in or-
der to allow the cooking chamber (1) to
dry out completely.
Set-up and start-up
