Page EN-10
The cast-iron hob
The cast-iron hob
“Burning off” the solid plates
NOTICE
Risk of damage!
■
The solid plates should be used wi-
thout cookware only when ‘burning
off’ before the initial start-up.
• This process is part of the start-up. It is
needed to remove the preservative lay-
er on the solid plate. Switch on all solid
plates one after the other to the highest
position:
– Turbo solid plates approx. 3 minutes
– Normal solid plates approx. 5 minutes.
Solid plates and temperature
controller
CAUTION
Risk of burns!
During its use, the device and its expo-
sed parts can become hot.
■
The solid plates get very hot during
operation and will remain hot after
they are switched off.
NOTICE
Immediately remove anything that bo-
ils over.
Solid plates ( in cm)
Temperature
controller
(1) Normal solid plate (22.5)
(5)
(2) Normal solid plate (15.0)
(6)
(3) Turbo solid plate (18.5)
(9)
(4) Turbo solid plate (15.0)
(10)
(5) (6)
(9) (10)
(4)
(1)
(2)
(3)
The cast-iron hob has two turbo and two ‘nor-
mal’ solid plates. The turbo solid plates have
a red cross in the middle; this disappears with
increased use. The turbo solid plates oper-
ate like normal solid plates, but they are more
powerful and heat up quicker.
Every solid plate has its own temperature
controller.
• Turn the temperature controller to the
desired heating power as required: from
gentle to rapid boiling.
The heat settings (0 - 3) can be seen on
the temperature controller.
• Turn the temperature controller to level
“0” to switch off.
Power indicator light
(8)
The yellow power indicator light (8) is illu-
minated as soon as at least one of the solid
plates or the oven is switched on. It will switch
off again when
all
of the solid plates
and
the
oven are switched off.
Содержание 6022EE1.37eDW
Страница 32: ...Technische Daten Seite DE 32 ...