Hanse VTC Series, Инструкции по установке, эксплуатации и обслуживанию

Страница: 13 / 91

VTC-9 and Above:
Front and rear bi-parting doors (a total of 4 bi-parting doors) of the same
construction as the chamber that will give full access to the product under test.
Doors latch closed pneumatically and are sealed with two silicone gaskets to
maintain a moisture-proof seal under all chamber-operating conditions and to
reduced noise levels. Hinges and latches are of heavy-duty design and are
constructed of corrosion-resistant or plated materials.
Four (4) 12” x 24” (30.5 cm x 61.0 cm) multi-pane windows are provided, one in
each chamber doors. The multi-pane window assembly incorporates an integral
desiccant to insure dryness and minimizes internal fogging at low chamber
temperatures.
Access Ports
The multiple 6” (15.2 cm) diameter stainless steel access
ports with covers and plugs are provided to facilitated
data acquisition wire and power wires to the product
under test. The ports are welded on the interior, flanged,
and sealed on the exterior. Ports are also provided with
foam plug to minimize heat and noise transfer to outside
environment. The port is covered with a hinged cover and
fastener.
Chamber Lights
The chamber is provided with 120 v-halogen light(s)
controlled from an external control switch. Lights are capable
of rotating and pivoting to direct light as required for optimal
viewing of product under test. Optional recessed lights in the
chamber are optional and are fixed and use wide angle
halogen bulbs the same type as standard lights.
Authorization and Copyright of this document is
controlled by Hanse Environmental Inc.
13