Hanse VTC Series, Инструкции по установке, эксплуатации и обслуживанию

Страница: 80 / 91

Authorization and Copyright of this document is
controlled by Hanse Environmental Inc.
80
PAGE 4
SENSO
RS AN
D INS
TRUME
N
TATIO
N F
OR MAC
HINE
CON
DITION M
ONIT
ORIN
G
General Features
x
External transmitters, signal conditioners, and ICP
®
power supplies can be eliminated by direct
connection of the sensor to the Din Rail Signal Conditioner.
x
Optional 500Vdc Input to Output Electrical Isolation.
x
Selectable 24Vdc Unregulated, 18Vdc regulated, 4mA excitation to power sensor
x
4-20mA Output Signals for Vibration and Temperature.
x
Selectable 0-5 or 0-10Vdc Output Signal for Vibration.
x
Internal DIP switch selectable vibration ranges include:
Acceleration (g’s) Velocity (in/sec) Displacement (mils p-p)
5.00 0.50 10.0
10.00 1.00 20.0
20.00 2.00 40.0
x
Internal DIP switch selection for Peak or RMS.
x
Utilization of Filter Modules for field configuration of High and Low pass 2-pole filtering.
x
Analog output signal connections (RV) for conducting frequency analysis and machinery diagnostics.
x
LED indicators for Power, Sensor Fault, Acceleration, Velocity, and Displacement.
x
Electronic Sensor Fault Indication via 4-20mA output by providing a 0mA signal.
x
Configurable for ICP
®
Sensor Power disable to accommodate existing applications.
x
Removable Terminal Blocks for easy wiring.
x
35mm (1.38in.) Din Rail Mount configuration.
x
Space saving 22.5mm (0.9in.) wide design.