Hans Grohe Metris S 31460000, Руководство по сборке

Страница: 21 / 232

5
Important! The fitting must be installed, flushed
and tested after the valid norms!
Assembly
1.
Flush through the supply pipes.
2. Mount the S - unions and align them.
3. Fasten the mixer with the washers.
The hot and cold supplies must be of equal
pressures.
Assembly
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
31460000/31464000 The flow is changed from
bath to shower function by pulling the knob at the
upper side of the spout. After shutting off the
water flow, the mixer returns automatically to the
bath function.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1 – 0,5
MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bars = 147 PSI)
Hot water temperature:
max. 80° C
Recommended hot water temp.: 65° C
Centre distance:
Connections G ½":
cold right - hot left
To adjust the hot water limiter on single lever
mixers, please see page 7.
No adjustment is necessary when using a
continuous flow water heater.
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 0,15 MPa.
Important!
The non return valves must be checked regularly
according to DIN EN 1717 in accordance with
national or regional regulations (at least once a
year).
Spare parts see page 4
1 handle 31093000
1.1 screw cover 96338000
2 flange 97406000
3 nut 97209000
4 cartridge cpl. 92730000
5 flange 31460000/31660000 96467000
6 S-union 31460000/31660000
91440000
7 aerator cpl. 13914000
8 selector assy 94077000
9 diverter knob 96466000
10 non return valve 94074000
11 locking screw for handle 96059000
12 nut 96157000
13 sleeve 97738000
English