Hans Grohe Metris S 06401 0 Series, Инструкция по установке / Руководство пользователя / Гарантия

Страница: 3 / 20

3
Technical Information
Recommended water pressure 15 - 75 PSI
Max. water pressure 145 PSI
Recommended hot water temp. 10° - 140° F*
Max. hot water temp 176°F*
Flow rate @ 44 PSI 8 GPM
Hole size in mounting surface ⅜"
Max. depth of mounting surface 1⅜"
English
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
The mounting surface must be completed and
made watertight before installing this valve.
This valve requires ½" hot and cold supply
lines (not included).
For best service of the thermostatic mixing
valve, the incoming hot and cold water must
be at the same pressure.
This valve is for a two-function installation.
Both outlets must be plumbed. Do not plug
either outlet. For a one-function installation,
see the special piping instructions.
To prevent scald injury, the maximum output
temperature of the shower valve must be
no higher than 10°F. In Massachusetts,
the maximum output temperature can be no
higher than 11° F.
Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
•
•
•
•
•
•
•
•