Hans Grohe AXOR Citterio Semi-Pro 39840 Series, Быстрый старт

Страница: 7 / 16

Hansgrohe single lever mixers can be used togeth­
er with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 0.15 MPa.
If the continuous water heater causes any problems
or there is not enough flow of water, the waterdim­
mer
®
(5) must be removed.
To adjust the hot water limiter on single lever mix­
ers, please see page 14.
No adjustment is necessary when using a continu­
ous flow water heater.
Maintenance non return valve
The non return valves must be checked regularly
according to DIN EN 1717 in accordance with nation­
al or regional regulations (at least once a year).
Spare parts (see page 4)
handle 39891XXX
1 .1 screw cover 96338000
flange 98603XXX
nut 96461000
cartridge cpl. 92730000
aerator cpl. 13913000
fixation cpl. 95049000
connection hose 900 mm 96316000
hose 720 mm 97475000
handspray 96920000
non return valve 97350000
XXX = Colors
000 chrome plated
800 steel
1�
2�
3�
4�
5�
6�
7�
8�
9�
10�
Assembly
Important!
The fitting must installed, flushed and
tested after the valid norms!
Flush through the supply pipes.
Place the mixer including the sealing washer in
position on the sink.
Slip the plastic washer, the slide washer, the
metall washer and collar over the hoses and
threaded base and tighten the collar nut by
hand. If there is not enough space, please use
only the slide washer and the metal washer
without the plastic washer.
Tighten screws.
Connect the supply pipes to the isolation
valves; cold right ­ hot left.
The hot and cold supplies must be of equal pres­
sures.
Operation
The handspray is activated by pressing the button.
After releasing the button, the mixer returns auto­
matically to the standard function.
If the waterflow drops, clean the filter located
between hose and handspray.
Technical Data
This mixer series-produced with waterdim-
mer
®
(flow limiter)
Rate of flow with waterdimmer: 8 l/min 0,3 MPa
Rate of flow without waterdimmer: 15 l/min 0,3 MPa
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 ­ 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80° C
Recommended hot water temp.: 65° C
Anti­pollution­function
1.
2.
3.
4.
5.
English