background image

15

D.  Accessories, connected materials and products, or related products not manufactured by Hansgrohe.

TO OBTAIN WARRANTY PARTS OR INFORMATION

Contact your Hansgrohe retailer, or contact Technical Service at:

Hansgrohe Inc.

149 Bluegrass Lakes Parkway

Alpharetta GA  30004

Toll-free (800) 334-0455.

In requesting warranty service, you will need to provide

1.  The sales receipt or other evidence of the date and place of purchase.

.  A description of the problem.

3.  Delivery of the product or the defective part, postage prepaid and carefully packed and insured, to Hansgrohe 

Inc. 149 Bluegrass Lakes Parkway, Alpharetta, Georgia 30004, Attention: Technical Service, if required by 

Hansgrohe.

When warranty service is completed, any repaired or replacement product or part will be returned to you postage 

prepaid. 

EXCLUSIONS AND LIMITATIONS

REPAIR OR REPLACEMENT (OR, IN LIMITED CIRCUMSTANCES, REFUND OF THE PURCHASE PRICE) AS PROVIDED 

UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER.  HANSGROHE NEITHER ASSUMES 

NOR AUTHORIZES ANY PERSON TO CREATE FOR IT ANY OBLIGATION OR LIABILITY IN CONNECTION WITH 

THIS PRODUCT.

HANSGROHE SHALL NOT BE LIABLE TO PURCHASER OR ANY PERSON FOR ANY INCIDENTAL, SPECIAL, OR 

CONSEQUENTIAL DAMAGES, ARISING OUT OF BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY 

(INCLUDING MERCHANTABILITY).

Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation 

or exclusion may not apply to you. This warranty gives you specific legal rights, and you may have other rights which 

vary from State to State. You may be required by law to give us a reasonable opportunity to correct or cure any failure 

to comply before you can bring any action in court against us under the Magnuson-Moss Warranty Act.

PRODUCT INSTRUCTIONS AND QUESTIONS

Upon purchase or prior to installation, please carefully inspect your Hansgrohe product for any damage or visible 

defect.  Prior to installing, always carefully study the enclosed instructions on the proper installation and the care and 

maintenance of the product.  If you have questions at any time about the use, installation, or performance of your 

Hansgrohe product, or this warranty, please call or write to us or call us toll-free at 800 334 0455.

Содержание Allegro2 E 04180XX0

















Отзывы: