Installation Considerations
For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly before beginning installation. Make sure
that you have all tools and supplies needed to complete the installation.
The high temperature limit stop may be reset, if desired.
•
•
•
Technical Information
Recommended water pressure
14.7 - 7.5 psi
Recommended hot water temp.
10
�
- 140
�
F*
Max. hot water temp
165
�
F*
Hole size in mounting surface
1-1/4”
Max. mounting surface depth
1 5/8”
Flow rate
. gpm
M3 Cartridge with high temperature limit stop
3/8” supply hoses - requires 3/8” compression fitting (not included)
*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater.
Solaris² E
04167XX0
Allegro² E
04180XX0
Metro² E
04193XX0
Single Control Lavatory Faucet
Solaris² E 04167XX0
Allegro² E
04180XX0
Metro² E
04193XX0
English
