Replacing exisTing sHoweRHead and aRM
wiTH alFie and wall oUTleT
•
Remove existing showerhead and shower
arm.
•
obtain a ½” male threaded brass nipple.
The nipple should be long enough so that
it extends 5/8” outside the surface of the
finished wall. wrap both ends of the nipple
with Teflon
TM
tape and install.
•
attach wall outlet (27458001) to the
exposed nipple. wrap the exposed male
end of the wall outlet with Teflon
TM
tape.
•
place a hose washer in the shorter hose
end connector. attach the short hose end
connector to the wall outlet. if wrench
tightening is necessary, protect the finish
with a cloth.
•
place a hose washer in the longer hose end
connector. attach this end to alfie and hand
tighten.
•
support alfie with a stationary handshower
support (28321000) or an angle-adjustable
porter’e handshower support (27504000).
NOTE:
ThE
abOvE
iNsTallaTiON
OpTiON
shOuld
bE
iNsTallEd
ONly
by
a
prOfEssiONal
plumbEr
.
MoUnTing alFie on a wallbaR wiTH wall
oUTleT
•
Remove existing showerhead and
shower arm.
•
obtain a ½” male threaded brass
nipple. The nipple should be long
enough so that it extends 5/8” outside
the surface of the finished wall. wrap
both ends of the nipple with Teflon
TM
tape and install.
•
install wall outlet (27458001) to the
nipple.
•
install wallbar Unica’b (27702000)
or Unica’s (27712000) at the desired
height.
•
wrap the wall outlet nipple with
Teflon
TM
tape. place a hose washer in
the shorter hose end connector. screw
this end to the wall outlet. place a
hose washer in the longer hose end
connector. attach this end to alfie and
hand tighten..
•
sit alfie in the holder on the wallbar.
N
OTE
: T
hE
abOvE
iNsTallaTiON
OpTiON
shOuld
bE
iNsTallEd
ONly
by
a
prOfEssiONal
plumbEr
.
existing handshower, snap-on connector
(28346000) can be specified.
noTe: disconnect the alfie handshower
from the hose by depressing the button.
Handshowers with the snap-on connector
are not recommended for use by children,
who may accidentally disconnect the
handshower while in use.
Replacing exisTing sHoweRHead and aRM
wiTH alFie and poRTeR’e HandsHoweR sUppoRT
and Hose
•
Remove existing showerhead and shower
arm.
•
obtain a ½” male threaded brass nipple.
The nipple should be long enough so that
it extends 5/8” outside the surface of the
finished wall. wrap both ends of the nipple
with Teflon
TM
tape and install.
•
install the porter’e with outlet (27508001)
mounting piece according to the installation
instructions included with it. install the
cover. wrap the outlet threads with Teflon
TM
tape.
•
place a hose washer to the shorter hose end
connector attach this end to the porter’e.
wrench tighten if desired, but use a cloth
to protect the finish on the hose and on the
porter’e.
•
place a hose washer to the longer hose end
connector. attach this end to alfie and hand
tighten.
•
sit alfie in the holder.
N
oTe
:
ThE
abOvE
iNsTallaTiON
OpTiON
shOuld
bE
iNsTallEd
ONly
by
a
prOfEssiONal
plumbEr
.
snap-on connecToR seT 28346000
if alfie is to be used as an accessory to an
