![background image](http://html1.mh-extra.com/html/novita/bn300-series/bn300-series_instruction-and-installation-manual_1712198001.webp)
Instruction and Installation Manual
BN300 series (BN310/ BN310S/ BN330/ BN330S/ BN350/ BN350S)
Name of components
Safety Instructions
�
These instructions are intended to ensure the safety of users and to prevent property damage.
�
Please read the contents carefully and use the product correctly.
Before installation and How to install
Front side of main unit
Rear side of main unit
Accessories
Before installation
Close the water supply valve.
�
Rotate the water supply valve to the right hand
side to close so that water may not come out.
Remove the existing toilet seat.
�
Remove the seat by untightening the nut using
a tool.
1
2
Separate the water tank hose.
�
Rotate the water tank hose to the left hand side
to separate.
3
�
Regular type of water
supply valve
�
Inner screwed water
supply valve
�
Specialized work is
required for special
type of water pipe,
flush valve, etc.
�
Contact the professional
plumber.
�
The water supply valve
not to be used will be
kept in a safe place for
future use.
Connect the T-connector.
�
Install the T-connector to the water supply valve
(where the water tank hose was removed).
4
�
If excessive force is applied, it may lead
to a risk of breakage.
Connect the water tank hose.
�
Water leakage may occur if a gasket is not used in the connections.
�
Hold the T-connector firmly when connecting the hose so the
T-connector does not rotate.
5
How to install
①
When attaching and fixing the main unit, make sure that the
center of toilet bowl is aligned to the center of the main unit.
②
Use tools, etc. to firmly tighten.
Install mounting plate guide to toilet bowl.
1. Remove bolt grommets, washers and nuts from the mounting
bolts and insert the mounting bolts through the mounting
plate.
2. Make sure that the difference in flatness of mounting bolt
catches the mounting plate guide.
3. Insert mounting bolts through the toilet bowl holes while
aligning the bolts with the holes. Then install the grommets,
washers, and nuts, in that order.
1
2
Install the main unit.
1. When attaching the bidet to the toilet bowl
�
Push the bidet all the way until click sound is heard while holding the bidet with both hands.
2. Move the bidet back and forth and right to left to check if it will not come off easily.
3. When disconnecting the bidet from toilet bowl.
�
Bidet can be separated easily.
�
Pull the bidet while pressing the main unit release button located on the right hand side of the
main unit.
3
Connect the water feed hose.
Connect the water feed hose to the main unit.
�
Check before connecting the hose to make sure
there is a gasket in the hose joint.
�
Water leakage may occur if the gasket is not used.
�
Before attaching the water feed hose, check to
make sure the filtering mesh is attached to the main
unit water inlet.
【
If the water filter is installed in a wide open space
】
【
If the water filter is installed in a narrow space
】
Check product operation
How to install a water filter
Check the operation of the product in the following order.
1. Insert the power plug into electrical outlet.
�
All lamps of control panel are blinking while nozzle is fully extended once and retracted (initial operation).
2. Wait until automatic water supply is completed.
�
Automatic water supply lasts for 10 seconds in which time
“
water pressure lamps
”
blinks one by one.
�
Once the automatic water supply is completed, the product setting is as follows; water pressure medium
level, warm water off, warm seat off
3. As seen to the right side, operate the sitting sensor
by pressing down the toilet seat next to the control part.
�
Once the sitting is detected, clean nozzle for about 5 seconds.
4. Check
“
cleansing function
”
operation by pressing
“
cleansing
”
button.
5. After confirming that water came out, stop the operation by
pressing
“
stop
”
button.
�
After nozzle is automatically cleaned three times, it is retracted.
Caution
Caution
WARNING
WARNING
Never connect the power plug of other product in the
toilet such as ventilator or any electrical heater to the
outlet to which bidet power plug is connected.
Safety warning
For water supply, use city water only. Never
connect industrial water or recycled water
supply to the product.
Solely use an electrical outlet of AC120V with
rated current of 15A or higher.
�
This product is for 120V only.
�
There is a risk of heat generation or
fire outbreak.
�
Make sure that the power plug is
securely connected to the outlet.
Never use damaged power cord, plug or loose
electrical outlet.
�
In such cases, contact the customer
service center for a replacement or
repair. Otherwise, it may result in a
fire or electric shock.
Exemption from liability
�
Manufacturer takes no responsibility for any damages resulting from natural disasters such as earthquakes, lightening and wind damage and
flooding, fires not caused by the manufacturer or the bidet product covered by this manual, other accidents, consumer mistakes and/or
misuse and abuse of the product or the use of the product under abnormal condition.
�
Manufacturer takes no responsibility for any incidental damages resulting from the use of the product or inability to use the product (lost
profits or suspension of business, etc.).
�
Manufacturer takes no responsibility for any damages resulting from the failure to observe the contents contained in this manual.
�
Otherwise, it may lead to skin
irritation, skin disorder and
cystitis. Furthermore, it may also
cause a malfunctioning of the
product.
�
If a malfunctioning product
is used as is, it may lead to a
fire, electric shock or water
leakage.
Please make a service call to
A/S center before using it.
Never place the product in water.
�
It may lead to a
malfunction or electric
shock.
Never disassemble, modify or repair the
product on your own. Please be careful so
that no foreign materials may get into the
product.
�
Otherwise, it may lead to a fire,
electric shock or injury.
�
For repair of the product, please
contact the customer service center.
Disassembly
Prohibited
Never water the main unit or power plug.
Never place the product in the place where a
lot of moisture exists.
Never place
unit in water
Use AC120V/60Hz electrical outlet which is
properly grounded. Ground must be connected
to prevent electric leakage or electric shock.
Ground
properly
connected
Never touch the power plug with wet
hands.
�
If wet hands are used to insert or disconnect power plug
to/from electric outlet, an electric shock or injury may be
caused.
Never use
wet hands
Be sure to disconnect the power plug from the
electrical outlet for safety when cleaning the
product or removing the product from toilet bowl.
�
Otherwise, it may lead to a malfunction and
electric shock.
Unplug the
power cord
Never place
unit in water
Never place, or throw into, lit cigarette or
other fire source close to the product.
No fire source
�
If not properly grounded, it may
result in a malfunction and electric
shock.
�
If your electrical outlet is not
grounded, contact a utility
company or electric service
company in your area.
�
Otherwise, it may result in a fire or electric shock.
(Warranty service is not available if a malfunction has
been caused due to the failure to follow this instruction)
�
Otherwise, it may lead to a fire or
malfunction.
Keep the power plug dust-free by
removing the dust using a dry cloth.
Make sure that a child would not put his/her hands
or other objects into nozzle or warm air outlet.
�
It may lead to burn.
�
It may lead to a fire or electric
shock.
�
It may lead to a malfunctioning
of the product.
Safety precautions
If the instruction is not followed, it may lead to death or injury of the
person who failed to follow it.
WARNING
If the instruction is not followed, it may lead to injury and/or property damage.
CAUTION
Users are required not to do any acts under this sign.
Acts prohibited
Users are required to strictly follow the instructions with this marking.
Forced instruction
Never connect to electrical outlet for any product
which has not been installed to toilet bowl and to
which water supply hose has not been connected.
�
It may lead to a fire or malfunction.
■
■
Never try to use a malfunctioning product as is.
■
■
This product is only intended to be used in toilet
room and should not be used for any other purpose.
Note
�
Keep the removed seat, seat cover, nuts, etc.
in the safe place for future use just in case.
Note
�
Check the water supply valve at the toilet room.
Additional optional accessories may be required in addition to the standard accessories.
If required, contact the shop where the product was purchased.
Note
�
For the water tank hose, the existing hose may be used as is.
It is an optional item that may be purchased depending on installation
environment and consumer needs.
When inserting power plug, the product remains fully installed.
If the plug is inserted with the product is erected, placed on the floor or tilted, malfunctioning may be caused.
Use hands or container, etc. when nozzle is extended so that water may not splash around.
Caution
Caution
Caution
Note
�
Threaded bolts may loosen with time.
If loose, retighten the nuts.
Caution
CAUTION
When the product is used by any person falling under the following categories, he/she should be taken care
of by his or her guardian so that he/she may not tumble down when taking a seat or standing from the seat.
Child or elderly, any other person who is unable to take a seat or stand from there on his/her own.
Never step on and stand on the seat or seat
cover or rest excessively against the seat cover.
Especially never be seated on the cover.
�
Never step on and stand on the main unit such as the seat or
seat cover.
�
The product may be broken or it may cause a malfunction.
�
It may also result in deformation and injury when the product
is broken.
Pay attention to low temperature burn.
�
Low temperature burn may occur even when the skin
remains in contact at relatively low temperature for a long
time.
�
When the product is used by a child, elderly, patient of a
disorder or any person who has difficulty in physical
activities, make sure that the water temperature, seat
temperature are set to LOW.
�
When the product is used by a healthy person at high
temperature, make sure that the temperature is reset to LOW
assuming that it may be used next time by a child, elderly or
a patient of disorder.
Never try to close the seat or seat cover
forcibly.
�
It may lead to a
malfunctioning of the
product.
Make sure that the warm air outlet and nozzle
part would not be contaminated with urine.
�
It may lead to bad smell and
malfunctioning.
�
If the nozzle spray hole is blocked,
remove the foreign material with a
soft tooth brush, etc.
Never try to pull or bend the hose of the
connecting pipe forcibly.
�
It may lead to a malfunctioning
or electric shock.
Product will have to be installed in the
place where no direct sun ray can reach.
�
Otherwise, it may lead to
discoloration or fading of the
original exterior color.
When cleaning the product, never use the detergent (detergent for gas range, sink, toilet bowl, toilet
room, acidic detergent, benzene, thinner, cleanser or stain remover, etc.) or spray deodorizer.
�
Otherwise, it may result in discoloration of exterior color, product breakage or electrical safety problems.