7.1 Adjusting the rotary brush
The package contains an Allen key to set up the
rotary brush and a screwdriver to reposition or
replace the rotary brush.
The adjustment screw allows you to set the
rotary brush parallel to the disc surface by means
of the enclosed Allen key
Should you need to remove the rotary brush,
release the two scews ( as illustrated ). You can
then remove the brush. Please note there is a
spring inside the cover.
The mounting socket which allows the rotary brush to be fitted as a third arm is slotted to
permit the brush to be aligned correctly. There is a rubber cover inside the socket which can
be removed to access the Philips screw which holds the socket in place.
Hannl Reinigungssysteme Beyenburgerstrasse 21 42899 Remscheid.
T492191/842 976 ; T492191/842 977 ; E-Mail [email protected]
