4.6 „AUTO-R“:
Records, which cannot be cleaned sufficiently during the normal cleaning process, can be
cleaned with the round brush. This applies for new records as much as for strongly dirtied
records, records from the flea market and wetly played records.
Set up your round brush following the operating and setting instructions. Fix the round brush
with the rear, on the round brush situated “KNURLED SCREW”. (see chapter “ROUND
BRUSH”)
Now turn the “PROGRAMME SELECTION SWITCH” to position „AUTO-R“.
The turntable starts at low speeds. Please choose the appropriate speed of the turntable
(Recommended are 2-3 bars on the “STATUS DISPLAY”)
Now you can moisten the record with the cleaning liquid (Vi3C – on round brush) from the
supplied bottle so that a surge builds up in front of the brush. It is important that the device
stands horizontally. (see “ADJUSTABLE STAND”)
Slow turntable speed allows the cleaning liquid to stay on the record, so that the liquid has
its appropriate affect and is not pressed outward by the centrifugal force. The “brush roller”
should at most lightly touch the record. The cleaning effect results through the turbulent
flow of the cleaning liquid under the brush. After aprox. 1 minute the plate changes its
direction of rotation, an iterative process that continues until you interrupt the programme.
If you have plugged on the normal cleaning brush, you can press the „SPEED/LIQUID“ button
to apply the cleaning liquid via the brush.
4.7 “ADJUSTABLE STAND”
To achieve optimal cleaning results it is important, that your record cleaner stands straight
so that the cleaning liquid is distributed evenly. Unevenness can be corrected by
readjusting the stand. Screw out the stand feet until a secure footing is achieved. On
delivery the stand feet are turned entirely inwards.
Hannl Reinigungssysteme Beyenburgerstrasse 21 42899 Remscheid.
T492191/842 976 ; T492191/842 977 ; E-Mail [email protected]
