5. TOP VIEW, incl. BRUSHES
5.1 “SUCTION ARM”
Upon completion of the wash sway the suction arm on the record. Then switch the
“PROGRAMME SELECTION SWITCH” to position „VACUUM“. Please make sure that the clamp
on the outlet hose is closed properly. The knurled screw on the back side of the suction arm
conduces to secure the suction arm. That way the suction arm stays screwed in and cannot
turn away during the suction procedure.
5.2 “BRUSH ARM”
For the normal wash sway the suction arm and also the round brush off the record and
connect the hose that exit the device with the “BRUSH ARM”( via the brush arm the cleaning
liquid is applied). Once the brush arm is situated adequately on the record, you can fix the
round brush with the rear, on the round brush situated knurled screw. It is recommended to
wash the brush arm under flowing water and wipe off any moisture with the supplied
microfiber cloth after the cleaning procedure.
Hannl Reinigungssysteme Beyenburgerstrasse 21 42899 Remscheid.
T492191/842 976 ; T492191/842 977 ; E-Mail [email protected]
