14
The average mode will calculate the average for a period of up to
24 hours. If a different mode is selected for that channel, the
average will no longer calculate and the value will be lost.
At the end of the 24 hour period, the "AVG" tag will blink to
indicate that sampling has stopped, and the displayed value is
the last average calculated.
If a probe is removed or over-range is reached while in average
mode, the display shows flashing dashes and blinking "AVG" tag.
The average value is lost and will not restore even if the condition
restores. To start the average cycle again, either press CLR or re-
enter the average mode.
• While in T1-T2 (not for
HI93551R
), pressing DISP will switch
between 4 displays:
Note
: Pressing T1/T2 to change the channel will not alter the
information chosen to be displayed for each channel (DISP).
For example, if T1 is in average mode, the average will continue
to be calculated even if the user press T1/T2 to see T2.
Note
: Relative/average modes cannot be entered if dashes are shown
in the main portion of the LCD.
Note
: The auto-off time is disabled whenever a channel is set to
average mode.
