Hanna Instruments HI 92804, Инструкция по эксплуатации

Страница: 4 / 18

7
7
SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS
HI 92701 AND HI 92704 HI 92701 AND HI 92704 HI 92701 AND HI 92704 HI 92701 AND HI 92704 HI 92701 AND HI 92704
HI 92701C HI 92701F
HI 92704C HI 92704F
Range -200.0 to 999.9°C -300.0 to 999.9°F
1000 to 1370°C 1000 to 2500°F
Resolution 0.1/1°C 0.2/1°F
Accuracy ±0.3% of reading ±0.3% of reading
(@25°C/77°F) or ±0.5°C or ±1°F
for one year, excluding probe error
Typical EMC Deviation ±5°C ±10°F
Power Supply 4x1.5V AA size, 500 hours with 60' printing
interval. Socket for 12VDC adapter
Auto Shut-off After 5 minutes of non-use
Channels 1 for HI 92701; 4 for HI 92704
Printer Low-power impact belt type, 14 characters per line
using 38 mm plain paper
Printing Intervals 1, 2, 5, 10, 15, 30, 60, 120 and 180 minutes
Environment 0 to 50 °C (32 to 122°F) Max. 95% RH
Dimensions 220 x 82 x 66 mm (8.7 x 3.2 x 2.6")
Shipping Instrument: 500g (18 oz.)
Weight Kit: 1.4 kg (3.1 lb.)
SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS
HI 92801 AND HI 92804 HI 92801 AND HI 92804
HI 92801 AND HI 92804 HI 92801 AND HI 92804
HI 92801 AND HI 92804
HI 92801C HI 92801F
HI 92804C HI 92804F
Range -200.0 to 999.9°C -300.0 to 999.9°F
1000 to 1370°C 1000 to 2500°F
Resolution 0.1/1°C 0.2/1°F
Accuracy ±0.3% of reading ±0.3% of reading
(@25°C/77°F) or ±0.5°C or ±1°F
for one year, excluding probe error
Typical EMC Deviation ±5°C ±10°F
Power Supply 4x1.5V AA size, 500 hours with 60' printing
interval. Socket for 12VDC adapter
Auto Shut-off After 5 minutes of non-use
Channels 1 for HI 92801; 4 for HI 92804
Printer Low-power impact belt type, 14 characters per line
using 38 mm plain paper
Printing/Logging Intervals 1, 2, 5, 10, 15, 30, 60, 120 and 180 minutes
Environment 0 to 50 °C (32 to 122°F) Max. 95% RH
Dimensions 220 x 82 x 66 mm (8.7 x 3.2 x 2.6")
Shipping Instrument: 500g (18 oz.)
Weight Kit: 1.4 kg (3.1 lb.)
Untitled-27
8
8
ON/OFF
TEMP
INITIAL PREPARATION
Each meter is supplied complete with batteries. Remove the back
cover, unwrap the batteries and install them while paying attention
to the polarity.
To prepare the instrument for use, connect a K-type thermocouple
temperature probe to the connector located on the top of the
instrument.
To switch the HI92701 and the HI92704 on,
press the ON/OFF key.
To switch the HI92801 and the HI92804 on,
press the TEMP key.
Choose the most appropriate temperature probe(s) for your applica-
tion (see page 30) and connect it (them) to the meter.
HI 92701 and HI 92801 have a single probe connection.
HI 92704 and HI 92804 have four probe connectors.
With the meter facing you, channel #1 is the first connector on the
top left hand side.
If the temperature probe is not connected to the instrument, the
meter will display and print "----" to alert the user.
This also indicates the possibility of a broken probe cable. The channel
is displayed with "CH" and the number of channel (four channels
versions only).
Note: To ensure accurate readings it is recommended that the
temperature probes be connected to consecutive channels be-
ginning with channel #1. For example, if only one probe is to
be used, it must be connected to channel #1. If 2, 3 or 4
probes are to be used, they must be connected to channels 1,
2, 3, and 4 in ascending order.
CH
°C
OPERATIONAL GUIDE OPERATIONAL GUIDE OPERATIONAL GUIDE OPERATIONAL GUIDE OPERATIONAL GUIDE