Hanna Instruments HI 92804, Инструкция по эксплуатации

Страница: 11 / 18

21
21
UP
TIME
ALT
TEMP
UP DOWN
UP
TIME
ALT
TEMP
INTV
TIME
INTV
TIME
INTV
TIME
LOG
UP DOWN
TIME LOG
ALT
TEMP
Example:
Step One - Setting the printing/logging interval at 2 minutes:
Press ALT and TIME keys twice. The time will appear on the primary
display with a number representing the printing/logging interval
blinking.
Press either the UP or DOWN keys until a blinking "2" appears.
Press ALT and TIME keys to exit. The display will now show the
current time together with the selected interval of 2 minutes.
Step Two - Entering the log mode:
Press ALT and LOG keys. Initially, " L 01 " will appear on the primary
display.
The meter is now in the printing/logging mode utilizing log number
1 , page 16 . "LOG" and P 15 shown in the secondary display indicate
that the meter has entered the log mode, and has 15 available
pages of memory remaining. After the initial printout, the time and
printing/logging interval will reappear.
Press the LOG key to view the running log and page numbers.
INTV
TIME
LOG
LOG
Untitled-27
22
22
LOG
Press the LOG key again to view the running sample number
Step Three - Stopping the printer during the log mode:
After the third printout is completed, press the ALT and PAPER keys.
At this point the meter will continue to log data every 2 minutes but
will no longer print any information. "LOG" will keep blinking on the
secondary display for the remainder of "L 01" (log number 1).
Note: If the display has shut off press the TEMP key to reactivate it.
Step Four
- Leaving the log mode:
Once the number of samples stored in memory has reached 10, press
the ALT and LOG keys. The meter will exit the log mode after
generating a log exit status printout.
Step Five - Reviewing the stored data in sample number 1:
Press LOG key to enter the memory recall mode. The next available
log and page number will be shown on the display.
Press the ALT and DOWN keys until the number 10 and "L1" appear,
indicating that a total of 10 samples were recorded in log number 1.
LOG
UP
PAPER
ALT
PRINT
LOG
UP DOWN
TIME LOG
ALT
TEMP
10-01-96
==01== 0002M
0010 *00.18
LOG
DOWN ALT