Hanna Instruments HI 700 Series, Инструкция по эксплуатации

Страница: 31 / 56

31
Command Parameter Description
CAR null Request calibration data
GET NN Request setup item NN
K01 null Same as CFM + +CAL keys
K02 null Same as LCD+CAL+SETUP keys
KCD null Same as CAL DATA key
KCF null Same as CFM key
KCL null Same as CAL key
KDS null Same as LCD key
KDW null
Same as key
KRG null Same as key
KST null Same as SETUP key
KUP null Same as key
MDR null Request firmware code
ECR null
Request EC reading
(in control or idle mode only)
TDR null
Request TDS reading
(
HI710 models only, available in
control or idle mode only)
RNG null
Request measure Range
(in control or idle mode only
TMR null Request temperature reading
PWD NNNN Send the 4-digit password
SET NNPC1C2C3C4C5
Set setup item NN to the
PC1C2C3C4C5 value
P=+ if value is greater than 0
P=- if value is less than 0
C1 can be 0 or 1 only
C2C3C4C5 can be 0÷9 or blank
(the command is not available if
the controller is in setup mode)