24
• When the whole password has been
inserted, press CFM to confirm it .
Note
The default password is set at “0000” .
ENTERING SETUP ITEMS
After confirmation of the password the
primary LCD will show the name of the
first setup group (see table) while the
secondary LCD will display the setup
code of the first item of the group .
• By pressing the
or
key it is possible to cycle through
the setup groups; the secondary LCD will always show
the code of the first item of the group .
• Once a group is selected, it is pos-
sible to choose an item manually .
Pressing the
key, the first digit of
the setup code will start blinking .
Now it is possible to change its
value by pressing the
or
key .
• Pressing the
key again, the first
digit will be fixed while the second
digit starts blinking and its value can
be changed as described above .
• By pressing the
key again all the digits will be fixed .
• If CFM key is pressed, the selected item is confirmed; the
secondary LCD will show the setup item code while the
primary LCD will display the current item value .
If a fixed set of values is available for the selected item,
use the
or
key to switch between them .
Содержание HI 504
Страница 1: ...HI504 Panel mounted Microprocessor based pH ORP Process Controller Instruction Manual...
Страница 36: ...36...
