8. Set the
H2O Selector Knob
to the “Brine Draw” position by turning it clockwise to draw the water from the brine tank until it stops.
9. Connect unit to approved power source (make sure the motor is running by looking in the sight hole on the back of the motor).
10. Set the
H2O Selector Knob
to the
“Brine Fill” position by turning it clockwise and allow the unit to return to the “In Service” position on its own.
11. Add salt into brine tank until full.
12. Reattach control valve back cover.
13. Double check that the bypass valve is in the normal open position.
