Hanil Smart 15 Plus, Руководство по эксплуатации

Страница: 16 / 24

www.ihanil.com 16/21
4. Operation
This funcion is used for short run centrifugation.
1. Set the desired run speed. [ Refer to. 4.2 Setting RPM/RCF]
2. Press the Start/Stop/Pulse button more than 3sec.
▶ The rotor accelerates at maximum rate to the set speed and stops automatically.
[Saving]
1. Set the RPM(or RCF) / Run time / Accel, Decel rate
2. Press the Left of Right button until Prog display flashes(0).
▶ You can save 10(0~9) programs.
3. Press Up or Down button until the required program number is displayed.
4. Press the Enter button.
[Calling up]
1. Press the Setup/Enter button.
2. Press the Left of Right button until Prog display flashes(0).
3. Press Up or Down button until the required program number is displayed.
4. Press the Enter button.
4.6 Short Run
4.7 Saving/Calling up a Program