20
You can press
+
to enter the system setting menu, then
press
and it will be switched to display style menu(as shown in figure
10): you can press
or
to enter the sub-menu.
Layout Sub-menu:
Digits Style
is set to Normal by default, you can set it to Normal/7-Seg
V1/7-Seg V2(as shown in figure 11).
Home Style
is set to 0(traditional style), you can also set it to 1(Detail
Style) or 2(Curve Style), the display style you choose will become the
default style after power on.
Custom Colors(figure 12):
You can set the the display colors for output voltage, output current,
output power.....as shown in figure 10 and figure 11. After change the color, you need to turn on the
Custom Colors
option to apply the settings(as shown in figure 13).
1.4.2.7 Storage Data Setting
You can press
+
to enter the system setting menu, and then press
button twice to
enter the data storage setting menu(as shown in figure 14).
Press the Enter button to enter the sub-menu, press the direction button to choose the data group,
you can rotate the encoder potentiometer to switch 6A and 12A range, then set the value.
Press
button to set the output current value, you can use encoder potentiometer to adjust
the output value directly. And you will not set the value which exceeds the
limit in this way, press
button to move the cursor. Of course you
can use keypad to type in the value, and press
to confirm, and it
will save the set value and set current range, if you set a value exceeds the
limit, it will prompt like what shows in Figure 1. If you set the wrong value,
you can press encoder potentiometer to cancel.
Press
button to set the output voltage value, the operation way is similar to output current
setting.
Press
+
button /
+
button to set the over current protection/ over voltage
protection value. The operation method is similar to output current setting.
figure
12
figure 13
figure 14
