18
Buzzer
is set to ON by default
,it will show
on the top, and you can hear the beep when press
the button. When set it OFF, it will show
, there will not be beep when press the button.
Backlight
is set to level 4 by default, it can be set between level 0-5.
Update Rate
is set to Low by default, you can set it low/mid/high, it is the fresh rate of the real
output voltage and current.
Max Power
is set to 740W by default, you can set it between 0-740W, it is the max output power. On
the top you can see the *1 icon, it is the adjustment magnification, you can press
or
to choose
the different
magnification so that you can set the value quickly, The max output is default voltage priority
mode, when the setting voltage*setting current is higher than the max power, the device will
automatically
decrease the output current setting value. When used together with low power power source, it is
recommended to set the value as the rated power of the power source*95%;
Temperature
unit is
℃
by default, it can be switched between
℃
and
℉
(figure 6);
Battery Charger Sub-menu(figure 7):
Cut-Off Current
is set to 10mA by default and it can be edited. On the
top you can see the *1 icon, it is the adjustment magnification, you can
press
or
to choose the different
magnification so that you can set
the value quickly, when the real output current is lower than this set value,
the output will be cut off automatically.
Cut-Off Temp.
is set to 60
℃
by default, when the external
temperature sensor detect over 60
℃
, the output will be cut off
automatically.
figure 6
figure 7
figure 8
