19
Communication Sub-menu(figure 8):
Interface
is set to USB by default, you can also set it to
WIFI/TTL/RS485, USB means the micro USB port, you can see
on the
top when set it USB, and when the communication starts, it will show
;
You need to insert a WIFI board to use the WIFI function, and it will show
on the top, and when the communication starts, it will show
; TTL
is not available now; You need to insert RS485 module to use RS485, and it will show
on the top,
and when the communication starts, it will show
.
Address
is set to 001 by default, you can set it between 001 and 255;
The Baud rate and address on the device should be same with the information on PC software or
APP. You can see more communication at PC software and APP section.
Date and Time Sub-Menu(figure 9):
Date
and
Time
can be set from Year 2000 to 2100, press
or
you can select the option, and
use encoder potentiometer can adjust the value, it will be applied immediately when you change the
value, please do not set the wrong time.
1.4.2.6 Main Page Display Style Setting
figure 9
figure 10
figure 11
