24
3.9 Danger of collision
The machine should be operated in strict accordance with the requirements of this
manual and the maintenance manual, or if there are stricter industrial or local
regulations, the latter shall prevail.
★
Keep the platform floor unobstructed.
★
Do not enter or exit the platform unless the machine is fully retracted.
★
Close the access door before operation.
★
Do not operate the machine if the guardrail is not installed correctly or the access door is not
closed.
Danger of collision
★
Pay attention to the sight range and blind spots when moving or operating the machine,
★
Check the workplace to avoid obstacles or other possible hazards above your head.
★
Take care when using the platform controller and ground controller.
The colored direction
arrows indicate the driving, lifting/lowering and steering function of the machine.
★
The user must abide by the rules on personal protective equipment for users, workplace rules
and government rules (on safety helmets, safety belts and gloves).
★
The machine must be placed on a level surface or fixed securely before the brake is released.
★
The platform can only be lowered when there are no people and obstacles under it.
★
Control the driving speed based on ground conditions, congestion, gradient, location of
people, and any other factors that may cause a collision.
★
Do not operate the machine on the possible traveling route of any crane or moving gantry
unless the crane controller is locked or precautions have been taken to prevent any potential
collision.
★
Do not put your hands and arms close to parts where they may get jammed or stuck.
★
Do not operate under the platform or near the scissor arms when the safety bar is not in the
proper position.
★
Use good judgment and planning when using the controller to operate the machine on the
