35
6. Hydraulic oil level check
Check the oil level in the hydraulic oil tank.
The oil level should be in the place between
two limits.
The 2-3.5t square oil dipstick has three
surfaces with marks, and the figure inside the
round at the top of dipstick means the truck
model applied for(see figure)
：
symbol
○
25
means its value of mark can be
applied for 2t
～
2.5t truck;
symbol
○
30
means its value of mark can be
applied for 3t
～
3.5t truck;
When the mast is in the lowest place
：
For 2t
～
2.5t: the truck with standard mast
demands filling the hydraulic oil above the
mark of ―42‖; the truck with triplex mast
demands filling the hydraulic oil above the
mark of ―45‖.
For 3t
～
3.5t: the truck with standard mast
demands filling the hydraulic oil above the
mark of ―47‖; the truck with triplex mast
demands filling the hydraulic oil above the
mark of ―50‖.
7.
Brake fluid level check
Check the fluid level in the brake fluid
reservoir. The level should be between the
two seams of the reservoir. When adding fluid,
due care should be taken to prevent air from
entering the brake tube.
Caution
When adding fluid, due care should be taken
to prevent dirt or water from entering the
reservoir.
Brake fluid is dangerous to health, you
should avoid skin contact.
Brake oil fluid change
See
― Every half year maintenance (1000
hours)‖
7. Head lamp check
Make sure that the head lamp is lighting when
the key is at ―ON‖ position.
8. Turn signal check
Make sure that the turn signal operates
properly by moving the turn signal lever
9. Hand brake check
①
Drive truck slowly
②
Pull
hand brake lever, stop the truck,
and truck has no deviation.
10. Back-up lamp and buzzer check
The back-up lamp comes on and buzzer
sounds when the shift lever is placed in
reverse position
.
11. Turning
①
Operate the truck running slowly.
②
Turn the steering wheel to left and
right 3 times respectively.
Check that the steering forces are equal in