16
Step 4
Remove the pant and use a 9/64" drill bit to drill the
location marked in the previous step.
Step 5
Install a 4-40 blind nut into the hole from the inside
of the pant. The nut will be drawn into the plywood later
in this section.
Step 6
Install the following items onto the axle: 3/16" wheel
collar, wheel, 3/16" wheel collar.
Step 7
Secure the pant in place using a 4-40 x 1/2" socket head
screw and a #4 washer.
Use threadlock on the screw
to prevent it from coming loose in flight.
Step 8
Center the wheel in the wheel pant and tighten the collars
to prevent the wheel from moving side to side. Use
threadlock on both set screws.
Step 9
Repeat Steps 3 through 8 for the remaining wheel pant.
Section 5 – Landing Gear Installation
