Step 5
Depending on the model you have purchased, the items in this step will vary.
See “Which Model Do you Own?” (page 4) for more information.
Assemble the Roller Hinges to the Table Bed (EP-1300)
EP-560, EP-560 Ltd. & EP-860:
Use 3-Hole Roller Hinges (F5-1064)
EP-560 Sport, EP-950 & EP-970:
Use 3-Hole Roller Hinges with Traction Handles (TR-
1003)
)RUHDVHRIDVVHPEO\UHVWWKH7DEOH%HGDJDLQVWWKH&URVVEDU)LJXUH
2SHQWKH&DP/RFNVRQHDFKVLGHRIWKH7DEOH%HG)LJXUH
:LWKWKH3LYRW3LQVIDFLQJRXWZDUGLQVHUWWKLQJHVLQWRWKHEUDFNHWVRQHDFKVLGH
of the Table Bed Assembly. The Roller Hinges must slide between the Cam Locks and the
Brackets (Figure 16).
(QJDJHRQHRIWKHKROHVLQWKLQJHRYHUWKH%UDFNHW3LQ0DNHVXUHWKH5ROOHU
Hinges are in the same hole setting on both sides. Figure 17 shows the Roller Hinges
HQJDJHGFRUUHFWO\ZLWKWKH%UDFNHW3LQHQJDJHGLQ6HWWLQJ&
3XVKGRZQRQWKH&DP/RFNV)LJXUHWRVHFXUHWKLQJHV
NOTE:
Refer to the Owner’s Manual for an explanation of the hole settings.
If you are unsure, use Setting C to start.
Cam Lock
2
Pivot Pin
1
1
2
Unlocked
Locked
C
B
A
FIGURE 15
FIGURE 16
FIGURE 17
FIGURE 18
Bracket Pin
1
1
WARNING
!
NEVER disassemble the Roller Hinge.
