Step 3
Depending on the model you have purchased, the items in this step will vary.
See “Which Model Do you Own?” (page 4) for more information.
EP-560 models & EP-860:
Complete this step.
EP-560 Sport:
Complete this step to use the standard Ankle Lock System. To use with the
EZ-Up Gravity Boots refer to either the ComforTrak DVD or the insert that can be found with
the Conversio Bar.
EP-960 & EP-970:
Skip this step and proceed directly to Step 4.
Assemble the T-Pin Ankle Lock System onto the Main Shaft (E6-1600)
Install the Ankle Comfort Dial
6OLGHWKH$QNOH&RPIRUW'LDO%DU,$ZLWKSUHDVVHPEOHG$QNOH&RPIRUW'LDOLQWRWKH
hole at the front base of the Main Shaft (Figure 7).
7KH$QNOH&RPIRUW'LDOLVGHVLJQLJKDQG/RZVHWWLQJ3RVLWLRQWKHSUHDVVHPEOHG
Dial in the Low Setting (screw holes facing up) for ease of assembly. Slide the separate
Ankle Comfort Dial (IA-1118) onto the Ankle Comfort Dial Bar.
,QVHUWWKH6FUHZ,$)LJXUH$DQGWLJKWHQZLWKWKH6FUHZGULYHU)SURYLGHG
See Figure 7B for detailed view of Screw (IA-1123).
NOTE:
Refer to the Owner’s Manual for a complete description of the Ankle Comfort Dial
settings.
FIGURE 7
FIGURE 7A
FIGURE 7B
