Connect Braille
Installation
Page 8
on your Windows settings. However, in the selection list, you can select another language.
In the product list you find the manuals in the selected language. If the manual in the
selected language is not available, the English manual appears instead. In order to install
drivers, choose “Software installation”.
You can choose the following components of the software, to be installed:
•
Connect Braille Firmware: for updating the internal functions of your Connect
Braille.
•
Connect Braille user manual: this user manual.
•
Window-Eyes driver: latest Braille display driver for Window-Eyes
•
JAWS driver: latest Braille display driver for JAWS for Windows
•
HAL/Supernova driver: latest Braille display driver for HAL/Supernova
We recommend that you use the default setting for the installation. All required software
components will be installed. After completion of the installation program you will find a
group named "Handy Tech" in programs in the start menu. Here you find the following
subfolders:
•
BrailleDriver: here you find the key settings of your Connect Braille for your screen
reader
and you can change the driver’s settings.
•
Connect Braille: Here you find this user manual and one or more folders for
firmware updates. These folders are named by the software version of the included
firmware.
After installing successfully, you can hook on your Connect Braille on to your computer. In
the installation folder of your Connect Braille firmware you will find the following subfolders
(when installed completely):
•
Braille tables: contains the various Braille character sets for different Country
versions.
•
Firmware: contains four files for the internal programming of your Connect Braille as
well as system files.
•
Manuals: includes this user manual and important information
•
KeyboardLayouts: contains different keyboard files for different countries.
•
Uninstall: contains the uninstall program for this software.
2.3 Connecting the Power Supply
The power supply included in your package is used to recharge the batteries and for
providing power to the Connect Braille. The Connect Braille can be used without
restrictions even while the batteries are recharging.
When connecting the power supply, please plug the round, thin plug into the power supply
port behind the USB Type A port on the right side of the housing first. You can feel the
plug snapping into place. Now you can connect the power supply to an easily accessible
wall outlet. When disconnecting the power supply cable, please reverse the order of steps
above. When connecting the power supply cable while the device is off, you get the
message
’Battery quick charging’
and the Connect Braille turns off again.
If you plug in the power supply while the Connect Braille is switched on, a signal tone
indicates that the device runs no longer on Batteries.
