Handy Home Products 16691, Инструкция по эксплуатации

Страница: 16 / 20

16 Monterey
3/4"
3/4"
Mark
Fascia
Two-1-1/2"
Finish Nails to hold
all Fascia in place
then, once all
Fascia in place,
add five more
1-1/2" Finish Nails.
Fascia
Fascia butts up to
Roof Panel
Rafter End
Rough sawn
Cedar side
8
INSTALLING
FASCIA
8-A
Fig.1
Fascia Fascia
Roof Panel Roof Panel
Attach Fascia Trim with
two 1-1/2" Finish Nails
Fig.2
8-A: Place a mark 3/4” in on end of Rafter as
shown in Fig. 1. Center Fascia on Wall Panels in
between corners and 3/4” marks and butt Fascia
to bottom of Roof Panels. Tack on the Fascia
to the Gusset Brackets at each corner with
one 1-1/2” Finish Nails. Continue attaching
remaining pieces of Fascia. The 2 shorter 44-3/4”
Fascia will go over the door and the opposite
side. Once all Fascia are in place, finish nailing
along bottom edge and top of roof panel with five
more 1-1/2” Finish Nails.
Attach Fascia Trim over seam where two Fascia
panel pieces meet and attach with two 1-1/2”
Finish nails (predrill) through Fascia Trim into
Fascia Panel as shown in Fig. 2.
Note: Predrill to eliminate
splitting the wood
when nailing Fascia
and Fascia Trim.
❑
8 pcs. Fascia 5/8” x 3-1/2” x 46-7/8” Plywood
❑
2 pcs. Fascia 5/8” x 3-1/2” x 44-3/4” Plywood
❑
10 pcs. Fascia Trim
PARTS LIST 10’ GAZEBO
PARTS LIST 12’ GAZEBO
❑
12 pcs. Fascia 5/8” x 3-1/2” x 46” Plywood
❑
2 pcs. Fascia 5/8” x 3-1/2” x 44-3/4” Plywood
❑
14 pcs. Fascia Trim
PARTS LIST 14’ GAZEBO
❑
10 pcs. Fascia 5/8” x 3-1/2” x 46-3/8” Plywood
❑
2 pcs. Fascia 5/8” x 3-1/2” x 44-3/4” Plywood
❑
12 pcs. Fascia Trim