H&S 6128, Руководство оператора

Страница: 28 / 46

HEADS
Pressure Setting
The head weight pressure setting is factory set at
1600 psi. In certain field conditions, you may need
to change the setting to increase or decrease the
head weight.
Changing the setting;
• Move the Ball Valve Lever to the “OPEN
POSITION” as shown in the bottom picture.
• Pull up on the “PRESSURE ADJUSTING LEVER”
shown in the picture to INCREASE the pressure
thus making the heads LIGHTER.
• Pushing down on the “PRESSURE ADJUSTING
LEVER” shown in the picture DECREASES the
pressure thus making the heads HEAVIER.
• After you have achieved the level of head
pressure that you want, move the Ball Valve
Lever to the “CLOSED POSITION” as shown in
the top picture.
ADJUSTMENTS
VALVE IN OPEN
POSITION
VALVE IN
CLOSED
POSITION
PRESSURE
ADJUSTING
LEVER
-26-