H&S 175, Руководство оператора

Страница: 21 / 32

-19-
SERVICE
TIRES & WHEELS
Check the tire pressure after every 50 hours of operation. Tires should be inflated to the appropriate
pressure listed in the table.
Tire Pressure
10.00x22.5 75-85 PSI
Wheel lug torque should be checked after every 50 hours of operation and tightened to the appropriate
torque.
Wheel bolts must be tightened between 85-95 ft./lbs. of torque.
BEATER
Periodically inspect the beater for wear or damage. Damaged or broken teeth will cause excessive
machine vibration. The beater paddles are welded to the beater tube, replacement of these paddles,
should it be necessary, should be performed by authorized service personnel who are competent welders.
Addition of beater tips should be installed as a complete set, to maintain beater balance. Holes are
provided in the original beater paddle to accommodate the replacement tips. Always use H&S special
grade 5 bolts, washers, and nuts when replacing tips. Torque bolts to 60 foot lbs. Consult with your local
H&S dealer for additional ordering information.