H&S 175, Руководство оператора

Страница: 5 / 32

-3-

Manure Spreader was not damaged in shipment. Check for dents and loose or missing
parts. Report damage immediately to H&S Manufacturing Co., Inc.

All bolts and fasteners are tight.

Manure Spreader has been correctly assembled according to instructions in this manual.

All grease fittings have been lubricated. Gearbox is filled to proper level.

Hoses and fittings are properly attached and there are no visible leaks.

Guards and shields are secure.

Wheels are properly mounted to torque specifications.

Tires are inflated to correct pressure.

Drive chain tension and alignment is correct.

Decals are in place and legible.

Main apron chains are adjusted properly.
DEALER PRE-DELIVERY CHECK LIST
AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
After the Manure Spreader has been completely set-up, check to be certain it is in correct operating order
before delivering to the customer. The following is a list of points to inspect. Check off each item as you
have made the proper adjustments and found the item operating satisfactorily.
Connect the Manure Spreader onto a proper horsepower tractor and attach the PTO and
connect the lights. Connect the hydraulic hoses (if applicable) to the tractor remote outlets.
Run the Manure spreader and make sure all components operate properly.

PTO guard turns freely.

Hydraulic end gate operates smoothly.

Main apron operates smoothly.

Hydraulic system does not leak under pressure.

Lights and wiring functioning properly.

Implement and all components are functioning properly.
(Remove Dealer File Copy
At Perforation)
Serial #
Dealer’s Name
Signature of Pre-Delivery Inspector
Inspection Date
Model Number