User’s manual
Product introduction
Thank you for choosing our external MC-CR201 card reader.
The unquestionable advantage of this products is the possibility of trans-
fer between different memory card slots. The card reader ensures excellent
communication with most of the popular memory cards. The installation of
the card reader is extremely simple as it is using USB interface and no driv-
ers installation is required.
Mode Com takes care about the quality of its products not only by fulfilling,
but also by forecasting its clients expectations. Mode Com products users
are used to high quality, advanced technology, reliability and functionality.
We make our exceptional products especially for YOU.
To make better use of card reader capabilities, please read carefully this
manual.
Choose a better future – choose Mode Com!
System Requirements
1. IBM PC or Macintosh with USB 1.1 or USB 2.0 port available
2. Support Windows 98SE/2000/ME/XP/Vista, Mac system 8.6, 9.x, 10.1x or
10.2x or above, Linux kernel versions 2.4.x or above system.
• Allows data exchange in different sockets.
• Supports hot swapping.
• No external power required.
• 4 memory card slots.
• Supported memory cards:
Compact Flash (CF Card Type I & II)
Micro Drive Card
IBM Micro Drive Card
SONY Micro Drive Card
Smart Media Card
xD-Picture Card
Trans Flash Card*
Secure Digital Card
Mini SD
Micro SD
MMC
Multimedia PRO /Plus Card
Reduced sized MMC
Memory Stick
Memory Stick Duo
Note: Mini SD, Micro SD & Trans flash: memory card adaptors required.
Installation manual:
Plug the USB Interface plug into the USB port of PC or notebook.
Device will be automatically detected and installed.
Safe Release
Before you release the product, please use USB release program.
MC-CR201
Internal Card Reader
With USB 2.0 All in 1
www.modecom.eu
ENVIRONMENT PROTECTION:
This symbol on our product nameplates proves its compatibility with the
EU Directive2002/96 concerning proper disposal of waste
electric and electronic equipment (WEEE). By using the ap-
propriate disposal systems you prevent the potential nega-
tive consequences of wrong product take-back that can pose risks to the
environment and human health. The symbol indicates that this product
must not be disposed of with your other waste. You must hand it over
to a designated collection point for the recycling of electrical and elec-
tronic equipment waste. The disposal of the product should obey all the
specific Community waste management legislations. Contact your local
city office, your waste disposal service or the place of purchase for more
information on the collection.
Weight of the device: 50 g
Specification:
• Interface standard: USB 2.0 and backwards compatible with USB 1.1
specification
• Support high speed (480Mbps), full speed (12Mbps) and low speed
(1.5Mbps) transfer rate.
