Handlink Technologies WG-602 Скачать руководство пользователя

Страница: 170 / 172

Easy Hotspot Kit

169

Appendix B Regulations/EMI Compliance

FCC Regulatory Statement

Part 15-Class B compliant device

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including that which may cause undesired

operation.

This equipment has been test and found to comply with the limits for a computing device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. The equipment and the receiver should be connected the outlets on separate circuits.

4. Consult the dealer or an experienced radio/television technician for help.

Changes or modification not expressly approved be the party responsible for compliance could void the

user’s authority to operate the equipment.

Содержание WG-602













































































































































































Результаты поиска

Содержание WG-602

Отзывы:

Похожие инструкции для WG-602

Бренды по названию

Популярные бренды

Handlink Technologies WG-602, Руководство пользователя

Результаты поиска

Содержание WG-602

Отзывы:

Похожие инструкции для WG-602

Бренды по названию

Популярные бренды