Handicare Ibis 24 Скачать руководство пользователя | Manualshive

Страница: 37 / 52

background image

Adjustment options

37

5.5.3

Adjusting the depth of the
leg-rest

See fig. 010504030.

Depending on the length of the upper legs,
the leg-rests can be adjusted in terms of
depth.

The adjustment of the depth of the leg-rests
should be done as follows:

•

Loosen the Allen bolt (A) a few turns with
an Allen key with a key width of
6 mm.

•

Adjust the desired depth by sliding the
entire suspension bracket forward or
backward.

•

Tighten the Allen bolt securely again.

If the leg-rests are set too far backward (too close to the chair) it is
possible that the swivel castors touch the leg-rests when driving
backward or maneuvering. If this is the case, the leg-rests must be
brought forward a bit: there must be at least 1 cm (3/8") cm between
wheel and leg-rest.

If the leg-rests are set too far forward, it is possible that the
suspension bracket of the leg-rest comes out from under the seat
and pushes into the knees uncomfortably.
If this is the case, the seat should be adjusted forward.
See 'Position of the seat cushion'.

EBAXXX-010504030.nl.doc

5.5.4

Comfort leg-rest with gas-
spring angle adjustment

See fig. 010504050.

The comfort leg-rests are angle adjustable (A)
independently of each other. There is a gas
spring on each leg-rest that delivers enough
force to allow the leg-rest to go up easily.
If you wish to adjust the angle of the leg-rest,
move your leg upward so that the leg-rest can
move upward freely.

010504030

A

B

A

010504050

«
...
35
36
37
38
39
...
»

Содержание Ibis 24





















































Отзывы:

Нет отзывов

Похожие инструкции для Ibis 24

Comfort Classic

Бренд: ALCO Страницы: 15

Бренд: Sunrise Medical Страницы: 96

HYBRID LX LX1000 Rollator

Бренд: Lumex Страницы: 11

Бренд: Handicare Страницы: 32

Бренд: Solar Mobility Страницы: 46

Steel Wheelchair

Бренд: Medicare Technology Страницы: 3

Rugby League Wheelchair

Бренд: Roma Sport Страницы: 4

Бренд: Quantum Страницы: 2

Бренд: Jay Страницы: 3

Бренд: Power Stand Страницы: 24

Бренд: Vermeiren Страницы: 36

ROHO QUADTRO SELECT

Бренд: Permobil Страницы: 2

Бренд: Vermeiren Страницы: 176

Бренд: XXL-Rehab Страницы: 8

Бренд: Halley Страницы: 10

Бренд: Handicare Страницы: 13

Ergo Lite KM-2501

Бренд: Karma Страницы: 44

Бренд: identités Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды