Handicare Ibis 24 Скачать руководство пользователя | Manualshive

Страница: 21 / 52

background image

Operation

21

•

The person pushing the wheelchair must continue to push, to
prevent the wheelchair from moving downhill on its own accord.

•

Apply the brake of the wheelchair if it is not pushed or not
pushed hard enough. See 'Parking'.

Driving down a slope

The wheelchair will start to move by itself, caused by gravity.
Therefore, it does not have to be pushed. But it is necessary to
hold on to the pushing handles to apply some brake force, or (in
the case of Ibis 24") to adjust the speed of the hoops with both
hands, so that the wheelchair cannot start moving downhill at
uncontrollable speeds, which might cause frightful damage or
injury

It is not recommended to go down stairways.

SADKIB-010404030-en.doc

4.2.5

Parking

See fig. 010404070.

The wheelchair is equipped with drum
brakes on both back wheels. This way, the
wheelchair can be prevented from moving
by itself, during the getting in or out, or if the
wheelchair is being stored. The brake may
be operated both by the user and the
assistant (if applicable).
The brake is applied left and right
simultaneously.

The wheelchair is put on the brake as
follows:

By the user:

•

Ibis 12": Pull the handle (A) backward.

•

Ibis 24": Push the handle (B) forward.

By the assistant:

•

Ibis 12": Pull the handle (A) backward.

•

Ibis 12" and 24": Press the foot brake (C)
downward.

A

B

C

010404070

«
...
19
20
21
22
23
...
»

Содержание Ibis 24





















































Отзывы:

Нет отзывов

Похожие инструкции для Ibis 24

Бренд: Decon wheel Страницы: 5

Бренд: Handicare Страницы: 99

Бренд: Z-Tec Страницы: 4

Бренд: R82 Страницы: 23

Бренд: Karma Страницы: 24

Бренд: Motion Composites Страницы: 24

Бренд: LINE2design Страницы: 8

Breezy Elegance

Бренд: Sunrise Medical Страницы: 46

Hand Warmer IDM-HW

Бренд: Mo-vis Страницы: 36

Бренд: Thomashilfen Страницы: 44

Бренд: Jay Страницы: 2

Бренд: HMN Страницы: 5

Бренд: Costway Страницы: 2

Бренд: TON Страницы: 8

Бренд: OFF CARR Страницы: 7

Бренд: Veigel Страницы: 36

Бренд: Handicare Страницы: 8

Бренд: panthera Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды