Handicare Ibis 24 Скачать руководство пользователя | Manualshive

Страница: 3 / 52

background image

3

© 2002 Handicare

All rights reserved.
The information provided herein may not be reproduced and/or published in any form, by print,
photoprint, microfilm or any other means whatsoever (electronically or mechanically) without the
prior written authorization of Handicare.

The information provided is based on general data concerning the constructions known at the time
of the publication of this manual. Handicare executes a policy of continuous improvement and
reserves the right to changes and modifications.

The information provided is valid for the product in its standard version. Handicare cannot be held
liable for possible damage resulting from specifications of the product deviating from the standard
configuration.

The available information has been prepared with all possible diligence, but Handicare cannot be
held liable for possible errors in the information or the consequences thereof.
Handicare accepts no liability for loss resulting from work executed by third parties.

Names, trade names, etc. used by Handicare may not, as per the legislation concerning the
protection of trade names, be considered as being available.

XXXXXX-000001000-en.doc

2002-08

«
1
2
3
4
5
...
»

Содержание Ibis 24





















































Отзывы:

Нет отзывов

Похожие инструкции для Ibis 24

Бренд: Pride Mobility Страницы: 3

Бренд: E-Wheels Страницы: 12

Бренд: Pride Mobility Страницы: 2

Бренд: LINE2design Страницы: 8

Бренд: Koh-I-Noor Страницы: 2

Бренд: B+B Страницы: 17

Бренд: B+B Страницы: 168

Бренд: Karma Страницы: 48

Бренд: Pride Страницы: 22

Бренд: Permobil Страницы: 4

Lumex TENDERFLO WATER CUSHION

Бренд: Graham Field Страницы: 2

Integrated C.G. Tilt P-220

Бренд: Quickie Страницы: 29

Бренд: Ropox Страницы: 23

Бренд: Physipro Страницы: 12

FOOT POSITIONER

Бренд: Physipro Страницы: 12

CONTOUR LIBERTY PHYSIPRO

Бренд: Physipro Страницы: 20

Бренд: Physipro Страницы: 30

NEOX Tilt-in-Space

Бренд: Physipro Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды