Handicare 2000, Краткое руководство пользователя

Страница: 20 / 44

Quick Reference Guide Handicare 2000
17
should detect the charge voltage. The powered swivel chair can be
operated manually in case of emergency.
Powered footrest raiser
The powered footrest raiser is powered from a button under the armrest
or from a switch between the 2 seat parts. The powered footrest can be
activated all along the track.
The pcb used for the powered footrest raiser does not communicate
with the main pcb. The safety and the limits are build into the footrest
motor.
The foldable hinge
The foldable hinge is operated by the toggle. From the top of the stairs,
the toggle is pushed in the down direction. The lift will drive down the
track until it reaches the intermediate charge contacts. The lift will stop
at this point. Keep the toggle pushed in the down direction. After a
short pause the hinge will lower.
On the rail at the top and just above the foldable hinge are 2 contacts.
The contact on the upper tube is for the communication and the
contact on the lower tube is for the charging.
On the backside of the unit is a foldable hinge enable contact. This
contact shall be activated by the ramp to enable the foldable hinge to
move. At the same time the cupper strip in the power pack shall have
contact with the cupper strip on the rail, so the lift “sees” 33V=. In
case of a power down the foldable hinge will act on the foldable hinge
enable contact only.
On the rail are 2 switches to control the end position of the hinge and
to enable the lift to drive in case the hinge is completely (un) folded.
On the main board the dipswitch to enable foldable hinge shall be
activated. And on the board in the electric box on the rail shall be
activated. Consult the electric scheme for the right setting off the
dipswitch.