handi quilter Infinity 26 QM33001, Руководство пользователя

Страница: 19 / 90

18 |
www.HandiQuilter.com
Cycles the
needle up or
down
Configurable
button
Starts or stops
stitching
Configurable
button
Increases or
decreases
stitching
speed
(Manual
mode)
Increases or
decreases
stitches
per inch
(Regulated
mode)
NOTE : Pressing the plus or minus buttons on the handlebars also increases or decreases tension
after you press the Easy-Touch Tension™ button on the Main screen. As long as the East-Touch
Tension buttin is enabled, pressing the plus or minus buttons controls the tension setting.
For more information about configuring the handlebars and buttons, see To customize the handlebar
buttons
in the
Toolbar Options
section of this manual.
Install the handlebar labels according to what you want each handlebar to do. For example, if you are
right-handed, you may want the right handlebar to control starting and stopping the stitching.
NOTE : The traditional handlebar configuration has the Start and Pause buttons on the right
handlebar and the Needle Up and Down buttons on the left handlebar.
To attach labels to the handlebars
U
CAUTION : Be absolutely certain of your handlebar label choice before installing the labels.
Once they are stuck down they cannot be removed without damaging the switch.
1. Peel off the paper backing off the labels and place them on the front handlebars according to
how you plan to configure the functions.
2. Repeat for the rear handlebars, making sure that you match the placement from the front
handlebars.
Touch-Screen Displays
The Infinity comes with two identical 7-inch touch-screen displays – one for the front of the machine and
one for the back of the machine.
To install the front display
ONLINE : For more information about installing the front display, watch the video Installing the Front
Display
at: http://www.handiquilter.com/videos/hq-infinity/213/ .