handi quilter HQ Sweet Sixteen QM30270, Руководство пользователя

Страница: 29 / 42

Page 22
HQ Sweet Sixteen User Manual
Motor Speed Sensor Test
The “Speed” Sensor test can help you determine whether
or not there is a problem with the HQ Sweet Sixteen speed
sensor. Before performing this test, remove the bobbin
case and the top thread. Press the foot pedal so that the
machine will begin slowly rotating. The white box will
show a number that should stabilize at 100 if the sensor
is functioning properly. Release the foot pedal to stop the
ma chine. (Figure 38)
Press the “Main” button to return to the “Main” menu
screen or the “Back” button to return to the “More” menu
screen.
Pedal Test
The “Pedal” test can help you determine if there is a
problem with the HQ Sweet Sixteen foot pedal. As you
slowly depress the foot pedal a percent of depression
will appear in the white box. The foot pedal should be
controllable from 0 to 100%. (Figure 39)
Press the “Main” button to return to the “Main” menu
screen or the “Back” button to return to the “More” menu
screen.
System Information Screen
The serial number of the machine is displayed at the top of
the System Information screen. This number matches the
one found on the label at the back of the machine.
Information contained in the white boxes below the serial
number identifies the electronics board revision numbers
as well as the firmware revision numbers of the HQ Sweet
Sixteen.
The Lifetime and Trip (or project) stitch counters count
the number of stitches the machine is performed. The
Lifetime count is the total number of stitches made since
the machine was built. The Trip Counter can be reset to
keep track of the number of stitches made during a given
project. To reset this counter, press the blue “Reset”
button found aligned with the Trip counter.
The Lifetime counter cannot be reset and should be
used as an indicator to determine when general machine
maintenance should be performed by an authorized Handi
Quilter Representative. (Figure 40)
Press the “Main” button to return to the “Main” menu
screen or the “Back” button to return to the “More” menu
screen.
Main
Back
Reset
Serial Number HA010553310
Type
C-Pod
Handles
Board
2.00
3.00
Firmware
4.04
4.02
Stitch Counters
Lifetime
Trip
000005335
000005335
System Information
Figure 39
Figure 38
Figure40
Main
Back
Diagnostics
Motor Speed Sensor Test
The value stabilizes at 100.
Passing Test:
Remove bobbin case and top thread.
Clear all objects from the needle area.
Depress foot pedal completely.
173
Main
Back
Diagnostics
Foot Pedal Test
Remove bobbin case and top thread.
Clear all Objects from the needle area.
Depress foot pedal completely.
Value below varies from 0 to 100%
Passing Test:
45 %