handi quilter HQ Sweet Sixteen QM30270, Руководство пользователя

Страница: 15 / 42

Page 8
HQ Sweet Sixteen User Manual
Setting Up the Table (and Taking it
Down for Storage)
Check that the On/Off switch (page 7, Figure 3, #23) is
turned off (the 0 setting). Plug the power cord into the
top power outlet on the back of the machine (Figure 4).
Do not plug the power cord into a power source at this
time.
The lower power connector is available for powering
future attachments as they are developed by Handi
Quilter. (Not yet available.)
Installing the Power Cord
1. Plug in the foot pedal cord end into the foot pedal
connector (see page 7, Figure 3, #26).
2. Place the foot pedal under the table where operator
can reach it from the front of the machine.
The HQ Sweet Sixteen table has been designed to
accommodate the HQ Sweet Sixteen machine. It has
folding legs that are height-adjustable and is heavy
enough to provide stabilization for quilting at high speeds.
1. Open the box and gently remove the table, taking care
not to drop the table on the floor. The table weighs
nearly 50 pounds, so it is recommended that you ask
someone to help.
2. Unfold the legs, pulling on the horizontal braces until
the legs snap into place. Set the table upright.
3. Make the table taller by pinching the two height-
adjustment tabs on each set of legs and lifting on table,
while holding legs down with foot. Make the table
shorter by pinching the same tabs and pushing down on
the table.
4. To store the table, remove machine and return legs to
their lowest position.
5. The legs are attached to the table top with brackets
of two different sizes. One is longer than the other.
Identify the long and the short leg brackets.
6. Fold in the short bracket leg first. Push on the horizontal
braces to loosen the legs and push them back toward
the table top.
7. Repeat with the long bracket leg.
Installing the Foot Pedal
Placing the Machine in the Table
1. We recommend having someone help lift and place the
machine.
2. Lift the machine by putting one arm through the throat
space.
3. Guide the machine from the back of the table into the
slot. Machine is positioned correctly when the back of
the machine is flush with the back of the table.
Figure 4