Hand Held Products Scanteam 5700, Руководство пользователя

Страница: 33 / 100

2–9 SCANTEAM 5700 User’s Guide
✱
None
Low (500 milliseconds)
Good Read Delay Selection
Medium (1.0 second) High (1.5 second)
High (1.0 second)
Extra High (2.0 seconds)
Reread Delay Selection
✱
Low (175 milliseconds)
Medium (450 milliseconds)
Enable
✱
Disable
Laser Voting Selection
This selection allows you to set a time period that must pass before the scanner
can read the
same bar code again. Setting a reread delay protects against
accidental rereads of the same bar code. Longer delays are effective in
minimizing accidental rereads at POS (point of sale) terminals. Use shorter
delays in applications where repetitive bar code scanning is required.
This selection allows you to set a time period that must pass before the scanner
can read another bar code. Some terminals require a slower read rate. By
setting a good read delay, you can ensure a good read.
When Laser Voting is enabled, the scanner requires three (3) identical,
consecutive scans before the bar code data will be accepted and transmitted to
the terminal. When this selection is disabled, the bar code data will be
transmitted following one (1) valid scan.