Hand Held Products Scanteam 5700, Руководство пользователя

Страница: 86 / 100

8–4 SCANTEAM 5700 User’s Guide
Does the scanner read your bar code incorrectly?
If the scanner reads a bar code ( one beep for a good read ), but the bar code
is not displayed correctly on the host screen:
➊
The scanner may not be programmed for the appropriate terminal
interface.
Example: You scan “12345” and the host displays “@es%.”
Reprogram the scanner with the correct “Plug and Play” or Terminal
Selection bar code (
see Section 1).
➋
The scanner may not be programmed to output your bar code
properly.
Example: You scan “12345” and the host displays “A12345B.”
Reprogram the scanner with the proper Symbology selections ( see
Section 4, Symbology Menu ).
The scanner won’t read your bar code at all?
If the scanner will not read your bar code:
➊
Try scanning the Sample Bar Codes ( found on the back cover of the
User’s Guide ).
If the scanner reads the Sample Bar Codes, check that your bar code
is readable. (
See “Is the scanner having trouble reading your bar
codes” on the previous page. )
If the scanner does not read the Sample Bar Codes either, continue
to #2, below...
➋
If the scanner won’t read the Sample Bar Codes either:
Verify that the bar code symbologies are enabled. ( See Sections 4,
Symbology Menu. )
Verify that your bar code symbology is enabled. ( See Sections 4,
Symbology Menu. )
Scan the “Default All... ” bar code on each symbology menu page in
Section 4 to enable most symbologies. (
MSI and Plessey will have to
be enabled individually, as they are defaulted Off . )