Hand Held Products SCANTEAM 2070 BASE, Руководство пользователя

Страница: 118 / 132

8–4 Cordless System Manual
Does the Cordless System read your bar code incorrectly?
If the Cordless System reads a bar code ( one beep for a good read), but
the bar code is not displayed correctly on the host screen:
➊
The Cordless System may not be programmed for the appropriate
terminal interface.
Example: You scan “12345” and the host displays “@es%.”
Reprogram the Cordless System with the correct “Plug and Play” or
Terminal Selection bar code (
see Section 1).
➋
The Cordless System may not be programmed to output your bar code
properly.
Example: You scan “12345” and the host displays “A12345B.”
Reprogram the Cordless System with the proper Symbology
selections (
see Section 5, Symbology Menu).
The Cordless System won’t read your bar code at all?
If the Cordless System will not read your bar code:
➊
Try scanning the Sample Bar Codes ( found on the back cover of the
System Manual).
If the Cordless System reads the Sample Bar Codes, check that your
bar code is readable. (
See “Is the Cordless System having trouble
reading your bar codes” on the previous page.)
If the Cordless System does not read the Sample Bar Codes either,
continue to #2, below...
➋
If the Cordless System won’t read the Sample Bar Codes either:
Verify that the bar code symbologies are enabled. (
See Sections 5,
Symbology Menu.)
Verify that your bar code symbology is enabled. ( See Sections 5,
Symbology Menu.)
Scan the “Default All... ” bar code on each symbology menu page in
Section 5 to enable most symbologies.