manualshive.com logo in svg

Hand Held Products SCANTEAM 2070 BASE, Руководство пользователя

Поделиться
Скачать
Hand Held Products SCANTEAM 2070 BASE Скачать руководство пользователя страница 11

1–1

Cordless System Manual

Section 1

Introduction & Installation

Introduction

The Cordless Scanning System consists of the SCANTEAM 2070 Base unit
and at least one SCANTEAM 3470 Cordless CCD or SCANTEAM 5770
Cordless Laser Scanner.  Up to nine scanners may be associated with one
base.  Each cordless scanner has a removable, rechargeable battery pack and
provides real time decoding within a 50 foot (15.24 meter)

 radius of the base

unit.

The Cordless System is an economical, durable solution for a wide variety of
portable data collection applications.  The Cordless System features:

•

a tough, ergonomic thermoplastic housing for comfort and durability.

•

recognition and decoding of the most popular, industry-standard bar
code symbologies.

•

scanner coverage of up to 7854 square feet (730 square meters) in open
air environments.

•

a wide range of interfaces that are compatible with many POS, keyboard
wedge, and RS-232 terminals.

•

visible and audible feedback for confirmation of a successful decode.

•

a rechargeable battery designed to operate through a whole work day.

This System Manual contains information to help you set up, operate, and
program the Cordless System.  Product specifications, connector pinouts, scan
maps, a troubleshooting guide, and customer information are also provided.

The Cordless System can be programmed for many communications
parameters and input/output protocols compatible to the host, as well as
advanced data editing and formatting.  Programming is accomplished by using
the single programming bar codes in this manual (Sections 2 through 4).

This section contains the following “Getting Started” information:

•

Cordless System Main Components

•

Battery Pack and Charging Information

•

Cordless System Set Up and Connection

•

Beeper and LED Sequences and Meaning

•

Basic Operation of the Cordless System

•

Communication Between the Cordless System and the Host

•

Accessories for the Cordless System

  A 50 foot radius is obtained under optimal, “open air” conditions.  Signals between the

base and its scanners need a clear path to communicate, free from RF interference.

Содержание SCANTEAM 2070 BASE





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды