Hand Held Products QUICK CHECK 890, Быстрый старт

Страница: 4 / 104

EN-2
Physical Connections
A DC power barrel on the back of the unit connects to a power supply for external
power and battery charging.
The DB9 port on the unit connects to the pen wand, mouse wand, or 3800V
imager. If you are using any of these devices, refer to the QC890 User’s Guide
for additional information.
The RJ45 ten pin connector provides the RS-232 serial or USB interface to the
host. Refer to "USB Communication Interface" on page EN-2 and "RS-232
Serial Communication Interface" on page EN-4 for details on connecting your
unit.
LED Indicators
Communication Interfaces
The QC890 Verifier system supports the following interfaces: USB, RS-232, and
Bluetooth
®
.
USB Communication Interface
Before connecting the QC890 Verifier, you must load Quick Check ImageData
software from the CD that was included in your kit. Install Quick Check
ImageData software from the CD to your host system.
LED Indication Cause
Green Solid Charging
Green Flash Good read
Red Flashing Low battery
Orange Solid Battery too low for unit to operate (plug in external power supply)