Hand Held Products QUICK CHECK 890, Быстрый старт

Страница: 3 / 104

EN-1
Quick Check 890 Verifier
The Quick Check
®
890 Verifier System (QC890) is a professional quality control
system for verifying the readability and standards compliance of printed linear
barcode symbols. This verification system implements an integrated approach
that consists of the Quick Check 890 Verifier unit and the Quick Check
®
ImageData (QCID) software.
Quick Check ImageData
The Quick Check ImageData (QCID) program was designed for use in
conjunction with the QC890 Verifier. QCID installation software is included on
the CD-ROM that accompanies your verifier.
The QCID is the graphical interface to the Quick Check 890 Verifier. It allows
you to save verification results for later reference. For additional information
about QCID, refer to the User’s Guide or help file.
Unpacking the QC890 Verifier
After you open the shipping carton containing the product, take the following
steps:
• Check to make sure everything you ordered is present.
• Save the shipping container for later storage or shipping
• Check for damage during shipment. Report damage immediately to the
delivery carrier.
Charging the Battery
We recommend that you charge the battery for at least 2 hours prior to use. You
may use the unit while charging the battery.
1. Plug the power supply into the port on the back of the unit.
2. Plug in the power supply to the AC main source.
Installation of Quick Check ImageData
To install Quick Check ImageData, insert the CD and follow the instructions that
appear.